Filter
Top Products
D-6
MAC Address Management
Viewing the MAC Addresses of Connected Devices
Viewing the MAC Addresses of
Connected Devices
To list the MAC addresses of devices the switch has detected, use the show
mac-address command. For example,
Figure D-3. Displaying MAC Addresses Detected by a Switch
Syntax
:
show mac-address [ mac-addr ]
Lists the MAC addresses of the devices the switch has
detected, along with the number of the specific port on
which each MAC address was detected.
[ port-list ]
Lists the MAC addresses of the devices the switch has
detected, on the specified port(s).
[ mac-addr ]
Lists the port on which the switch detects the specified
MAC address. Returns the following message if the
specified MAC address is not detected on any port in the
switch:
MAC address < mac-addr > not found.
[ vlan < vid > ]
Lists the MAC addresses of the devices the switch has
detected on ports belonging to the specified VLAN, along
with the number of the specific port on which each MAC
address was detected.
ProCurve(config)# show mac-address
Status and Counters - Port Address Table
MAC Address Located on Port
------------- ---------------
001e6-09620c 1
0001e7-61d4c0 2
0001e7-6025c0 3