Filter
Top Products
98 Removal and replacement
EN
Document release door
Note Although it is possible to separate the document release door from the
printer door without opening or removing the printer door, HP
recommends that you remove the printer door before replacing
components of the document release door.
1 Remove the printer door from the HP LaserJet 3100/3150
product.
2 Release the interlocks (callout 1) on each side of the document
release door and lift open the door (callout 2).
Figure 26. Document release door removal (1 of 2)
3 Rotate the strap on the left side of the printer door to unhook the
strap.
2
2
1
2