Filter
Top Products
106 Removal and replacement
EN
Document scanner pickup roller
It is possible to remove the document scanner pickup roller without
removing the document release door. However, the steps below detail
pickup roller removal with the assumption that the document release
door has already been removed.
1 Remove the document scanner guide by lifting it up while
pressing the two tabs at the left side of the assembly (see Figure
30).
2 Use the small flatblade screwdriver to pry the right end of the
pickup roller shaft from its plastic mounting.
Figure 34. Document scanner pickup roller removal
3 Lift the right end of the pickup roller shaft out of its mounting; the
left end should follow easily.
Note Once the pickup roller shaft has been removed, parts can easily fall off
of the shaft. Upon reinstallation, make sure that all of the parts have
been replaced on the shaft in the correct order.