Filter
Top Products
EN
Control panel
45
Memory Full - Send
Unscanned Pages
During the fax job the memory filled. All
pages of the fax have to be in memory for
a fax job to work correctly. Only the pages
that fit into memory were sent.
Reload the pages that were not sent
and send them.
Memory is Full The HP LaserJet 3100/3150 product
memory was completely filled during a
copy or a scan.
This message should clear
automatically when the next task starts
(for example when you start a copy or
receive a fax).
Modem Error #
(number 1-3)
An error was detected with the modem. Make sure that the telephone cord is
securely connected on both ends.
Unplug the power cord from the power
source, wait 10 seconds, and replug in
the power cord.
Try a different power source or surge
protector.
No Answer You tried to send a fax, but the receiving
fax line did not answer.
Check the fax number and try again to
send the fax.
Try to send the fax to another fax
machine or try again later.
No Dial Tone The HP LaserJet 3100/3150 product
cannot detect a dial tone
Make sure that the telephone cord is
securely connected on both ends.
Press and hold S
TOP
/C
LEAR
for seven
seconds to check for a dial tone.
Make sure the phone line is working by
disconnecting the HP LaserJet 3100/
3150 product, plugging in a telephone to
the phone line, and making a voice call.
Connect the product to a different phone
line.
No Fax in (number)
Tr ie s
The HP LaserJet 3100/3150 product failed
to connect to the receiving fax machine in
the number of redials specified.
Check the fax number and try again to
send the fax. If the message appears
again, try to send the fax to another fax
machine or try again later.
Table 9. Control panel messages
Message Cause Solution