Filter
Top Products
EN
Media requirements
37
Media requirements
Media must be in good condition. Do not use media that is torn, worn,
or irregular. The table below details media requirements of the HP
LaserJet 3100/3150 product.
Table 8. Media requirements
Input for paper input bin and single-sheet input slot (for printer path)
Media size Maximum: 8.5 by 14 in (216 by 356 mm)
Minimum: 3 by 5 in (76.2 by 127 mm)
Media weight
For paper output bin: 16 to 28 lb; (60 to 105 g/m
2
)
For front output slot: 16 to 42 lb (60 to 157 g/m
2
)
Paper input bin capacity
Up to 100 sheets of media at 20 lb (75 g/m
2
) weight or lighter
(fewer than 100 sheets of heavier media) or up to 10 envelopes
Input for document feeder tray (for document scanner path)
Item size Maximum width: 8.5 in (216 mm)
Maximum length: 39 in (991 mm); up to 118 in (2997.2 mm) with
“long pages” enabled
Minimum size: 2 by 3.5 in (51 by 89 mm)
Item weight
Maximum: 28 lb (105 g/m
2
) for normal use;
up to 67 lb (252 g/m
2
) when using special media lever
Minimum: 12 lb (44 g/m
2
)
Document feeder tray
capacity
Up to 30 pages of an item at 20 lb (75 g/m
2
) weight or lighter
Fewer than 30 pages of items up to 28 lb (105 g/m
2
) weight
One page at a time of 12 to 67 lb (44 to 252 g/m
2
) weight using
special media lever
Output capacities
Paper output bin
Up to 100 sheets of 20 lb (75 g/m
2
) or lighter paper
Front paper output slot
Up to 20 pages of 20 lb (75 g/m
2
) or lighter paper
Document output tray
Up to 30 pages of an item at 28 lb (105 g/m
2
)