Filter
Top Products
EN
Error messages
153
Fax Memory Error
#(number 1-5)
An error was detected in DRAM. Unplug the power cord from the power
source, wait 10 seconds, and replug in
the power cord.
Try connecting the product to a different
power source or surge protector.
If the error persists, replace the
formatter.
Keypad Test Failed In Service Mode only, the keypad test
failed.
Check the cabling connections and run
the keypad test again.
If the error persists, replace the control
panel.
Run the keypad test again.
If, after replacing the control panel, the
error persists, replace the formatter.
Modem Error #
(number 1-3)
An error was detected with the modem. Check the cabling connections.
If the error persists, unplug the power
cord from the power source, wait 10
seconds, and replug in the power cord.
If the error persists, replace the LIU.
If, after replacing the LIU, the error
persists, replace the formatter.
No Modem Installed There is a problem in the LIU. Unplug the power cord from the power
source, wait 10 seconds, and replug in
the power cord.
Try connecting the product to a different
power source or surge protector.
If the error persists, replace the LIU.
If, after replacing the LIU, the error
persists, replace the formatter.
Nov-22-93 06:30 PM
(or any other
incorrect date that
cannot be reset to
the correct date)
The battery inside the HP LaserJet 3100/
3150 product has failed, causing all Menu
features to revert to the factory settings.
Settings that contained alphabetic and
numeric characters you entered, such as
header information and speed-dial names
and numbers, have been erased.
Replace the formatter.
Message Cause Solution