Filter
Top Products
92 Removal and replacement
EN
Left front cover
1 Remove the back cover and the left side cover.
2 Rotate the HP LaserJet 3100/3150 product so that you face its
left side.
3 Remove the pressure release lever cover by inserting the small
flatblade screwdriver into the slot (callout 1) to release the latch,
and then pressing up from the left side of the product.
4 Remove one (1) screw (callout 2) from the top of the left front
cover.
Figure 20. Left front cover removal
5 Remove the cover by popping the tab at the top and lifting the
cover up and away from the HP LaserJet 3100/3150 product.
2
2
1
2