Filter
Top Products
hp officejet 4100 series
chapter 3
12
set the paper type
If you want to use a different type of paper, such as photo paper, transparency
film, Iron-On T-shirt transfers, or brochures, simply load that paper in the paper
tray. You must then change the paper type settings to ensure the best print
quality.
HP recommends paper type settings according to the type of paper you are
using.
This setting refers to copy options only. If you want to set the paper type for
printing from a computer, set the properties in the Print dialog box of the
software.
1 Press the Copy button until Paper Type appears.
2 Press until the appropriate paper type appears.
3 Press Enter to choose the displayed paper type.
set the paper size
The HP Officejet can use Letter, Legal, or A4 paper. Use the following procedure
to set the paper size for copy options.
1 Press the Copy button until Copy Paper Size appears.
2 Press until the appropriate paper size appears.
3 Press Enter to choose the displayed paper size.
To avoid jams, remove papers from the output tray frequently. The output tray
capacity is affected by the type of paper and the amount of ink you are using.
For more information about output-tray capacity, see technical information in the
HP Photo & Imaging Help.
Labels
(works only with
printing)
• Always use letter-size or A4-size label sheets designed for use with
HP inkjet products (like Avery Inkjet Labels), and make sure that the
labels are not over two years old.
• Fan the stack of labels to make sure none of the pages are sticking
together.
• Place a stack of label sheets on top of standard paper in the paper
tray, print-side down. Do not insert labels one sheet at a time.
Postcards (works only
with printing)
Insert a stack of postcards or hagaki cards with the print-side down into
the paper tray until it stops. Line the postcards up on the right side of the
paper tray, slide the paper-width guide up against the left side of the cards
until it stops.
4-by-6 inch photo
paper (works only
with printing)
Insert the photo paper with the print-side down into the paper tray until it
stops. Place the long edge of the photo paper against the right side of the
paper tray, and slide the paper-width guide up against the long edge of
the photo paper until it stops. If the photo paper you are using has
perforated tabs, load the photo paper so that the tabs are closest to you.
paper tips