Filter
Top Products
hp officejet 4100 series
chapter 7
32
clean the white strip
Minor debris can accumulate on the white strip located underneath the
scanner’s lid.
1 Turn off the unit, unplug the power cord, and raise the scanner lid.
2 Clean the white strip with a soft cloth or sponge slightly moistened with a
mild soap and warm water.
3 Wash the strip gently to loosen debris; do not scrub the strip.
4 Dry the strip with a chamois or soft cloth.
Caution! Do not use paper-based wipes as these may scratch the
strip.
5 If this does not clean the strip well enough, repeat the previous steps using
isopropyl (rubbing) alcohol, and wipe the strip thoroughly with a damp
cloth to remove any residual alcohol.
clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the case.
The interior of the unit does not require cleaning. Keep fluids away from the
interior of the unit as well as the front panel.
work with print cartridges
To ensure the best print quality from your HP Officejet, you will need to perform
some simple maintenance procedures, and when prompted by a front-panel
message, replace the print cartridges.
print a self-test report
If you are experiencing problems with printing, before cleaning or replacing the
print cartridges, you should print a Self-Test Report. This report provides useful
information about your print cartridges, including status information.
1 Press Setup.
2 Press 1, then press 4.
This selects Print Report, and then selects Self-Test Report.
3 Press Start Black or Start Color.
A Self-Test Report is printed for your HP Officejet.
handle print cartridges
Before you replace or clean a print cartridge, you should know the part names
and how to handle the print cartridge.