Filter
Top Products
Service Reference Guide, dx7300 433611-001 C–7
POST Error Messages
2201-MEBx Module did
not checksum correctly
Memory error during
POST execution of the
Management Engine
(ME) BIOS Extensions
option ROM
1. Re b o o t t h e c o mp ute r.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the
system board.
2202-PMM
Deallocation Error
during MEBx cleanup
Memory error during
POST execution of the
Management Engine
(ME) BIOS Extensions
option ROM
1. Re b o o t t h e c o mp ute r.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the
system board.
2203-Setup error
during MEBx execution
MEBx selection or exit
resulted in a setup failure.
1. Re b o o t t h e c o mp ute r.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the
system board.
2204-Inventory error
during MEBx execution
BIOS information passed
to the MEBx resulted in a
failure.
1. Re b o o t t h e c o mp ute r.
2. If the error persists, update to the
latest BIOS version.
3. If the error still persists, replace the
system board.
POST Error Messages (Continued)
Screen Message Probable Cause Recommended Action