Filter
Top Products
© Copyright Hewlett-Packard Company 2002
All rights are reserved. No part of the document may be
photocopied, reproduced, or translated to another language
without the prior written consent of Hewlett-Packard
Company.
Portions Copyright © 1989-2001 Palomar Software Inc. The
HP Digital Copier Series includes printer driver technology
licensed from Palomar Software, Inc. www.palomar.com
Publication number: C7296-90280
First edition: January 2002
Printed in U.S.A., Mexico, Germany, Singapore, or China
Windows
®
, Windows NT
®
, Windows ME
®
, Windows XP
®
,
and Windows 2000
®
are U.S.-registered trademarks of
Microsoft Corporation.
Intel
®
and Pentium
®
are registered trademarks of Intel
Corporation.
notice
The information contained in this document is subject to
change without notice and should not be construed as a
commitment by the Hewlett-Packard Company.
Hewlett-Packard assumes no responsibility for
any errors that may appear in this document, nor
does it make expressed or implied warranty of
any kind with regard to this material, including,
but not limited to, the implied warranties of
merchantability and fitness for a particular
purpose.
The Hewlett-Packard Company shall not be liable for
incidental or consequential damages in connection with, or
arising out of the furnishing, performance, or use of this
document and the program material which it describes.
Note: Regulatory information can be found in the
“Technical information” section of the Support and
Specifications Booklet.
It is not lawful in many places to make copies of the
following items. When in doubt, check with a legal
representative first.
• Governmental paper or documents:
- Passports
- Immigration papers
- Selective service papers
- Identification badges, cards, or insignias
•Governmental stamps:
-Postage stamps
- Food stamps
• Checks or drafts drawn on Governmental agencies
• Paper currency, traveler’s checks, or money orders
• Certificates of deposit
• Copyrighted works safety information
Always follow basic safety precautions when using this
product to reduce risk of injury from fire or electric shock.
WARNING: potential shock hazard
1 Read and understand all instructions in the setup poster.
2 Use only a grounded electrical outlet when connecting
the unit to a power source. If you do not know whether
the outlet is grounded, check with a qualified
electrician.
3 Observe all warnings and instructions marked on the
product.
4 Unplug this product from wall outlets before cleaning.
5 Do not install or use this product near water or when
you are wet.
6 Install the product securely on a stable surface.
7 Install the product in a protected location where no one
can step on or trip over the line cord, and where the line
cord will not be damaged.
8 If the product does not operate normally, see the online
Troubleshooting help.
9 No operator-serviceable parts inside. Refer servicing to
qualified service personnel.
10 Use in a well-ventilated area.
Warning! To
prevent fire or shock
hazard, do not
expose this product
to rain or any type of
moisture.
GwenRG.book Page ii Thursday, January 31, 2002 5:20 PM