Filter
Top Products
troubleshooting tips
70
hp digital copier series
using a power-strip switch or by removing the power plug from the back of
the unit, the print carriage may not return to the correct position, which can
allow the ink cartridges to dry out.
mechanism
error
did you remove the protective tape from the ink cartridges and printheads
when you set up your unit?
Check each cartridge and printhead, and remove the tape if it is still
covering the ink nozzle. Do not touch the copper contacts.
For more information, see handle printheads on page 36 and handle ink
cartridges on page 40.
do you have a paper jam?
Clear the paper jam. Turn HP Digital Copier off and then on again.
For more information, see avoid paper jams on page 9.
is the print carriage blocked?
Remove any objects that are blocking the print carriage, and then turn the
HP Digital Copier off and on. Make sure you have removed all packing
materials.
GwenRG.book Page 70 Thursday, January 31, 2002 5:20 PM