Filter
Top Products
troubleshooting tips
58
hp digital copier series
hp digital
copier fails to
power on
did you check the electrical connection to the hp digital copier?
1
Make sure the power cord is firmly connected to both the HP Digital
Copier and the power supply box. Plug the power cord into a
grounded power outlet, surge protector, or power strip.
2
If you are using a power strip, make sure the power strip is on. Or try
plugging the HP Digital Copier directly into the power outlet.
3
Test the power outlet to make sure it is working.
4
If you have plugged the HP Digital Copier into a switched outlet,
make sure the switch is on.
Warning! If the HP Digital Copier still does not power on, there may be a
mechanical failure. Unplug the HP Digital Copier from the power outlet and
contact HP. See hp customer support on page 71.
did you press the On button too quickly?
The HP Digital Copier may not respond if you press the On button too
quickly. Press the On button once slowly.
hp digital
copier will not
make copies
have your ink cartridges expired?
When ink cartridges expire, the unit stops operating and a front panel
message lets you know which ink cartridge is expired. To protect against
deteriorated print quality and damage to your HP Digital Copier, the HP
Digital Copier monitors the age of the ink cartridges.
Warning! Do not remove the ink cartridges until replacement cartridges
are available or attempt to replace a printhead at the same time you are
replacing an ink cartridge.
GwenRG.book Page 58 Thursday, January 31, 2002 5:20 PM