Filter
Top Products
Table 6-15 Power & Reset Page Description (continued)
DescriptionFields and Buttons
This option enables you to configure the power restore policy. The power restore policy
determines how the system behaves when ac power returns after an ac power loss.
You must have iLO configuration access right to use this option.
• Restore Previous Power State: The power is restored to the state that was in effect
when ac was removed or lost.
• Automatically Power On: The system is powered up after ac is applied.
• Remain Powered Off: The system will stay powered off after ac is applied; pushing
the system power switch or choosing the 'Power On' option under 'System Power
Control' is required to power on the system.
System Power Restore
Settings
This feature has the following options:
• Reset through RST signal: This option causes the system to reset through the RST
signal. Under normal operation, shut down the OS before issuing this command.
Execution of this command irrecoverably halts all system processing and I/O activity
and restarts the computer system. The effect of this command is very similar to
cycling the system power - the OS is not notified, no dump is taken on the way
down, and so on. You must have power control access right to issue this option.
• Reset through INIT or TOC signal: This option causes the system to be reset through
the INIT or Transfer of Control (TOC) signal. Under normal operation, shut down
the OS before issuing this command. Execution of this command irrecoverably halts
all system processing and I/O activity and restarts the computer system. It is different
from the previous option in that the processors are signaled to dump state on the
way down. You must have iLO configuration access right to issue this option.
System Reset
This feature has the following options:
• Reset BMC passwords: This resets BMC (EFI Shell) passwords.
• Reset BMC: This option enables you to issue a BMC reset. Under normal operation,
shut down the OS before issuing this command. You must have iLO configuration
access right to issue this option.
BMC
This feature has the following options:
• Reset to the iLO 2 MP default configuration: This option enables you to set all iLO
2 MP parameters back to their default values. You must have iLO configuration
access right to issue this option.
• Reset the iLO 2 MP: This option enables you to reset the iLO 2 MP. You can safely
perform an iLO 2 MP reset without affecting the operation of the server. You must
have iLO configuration access right to issue this option.
iLO 2 MP
Click to submit selections.Submit
Power Meter Readings
The Power Meter Readings page (Figure 6-18) enables you to graphically view and monitor
server power usage, temperature, and power regulator settings.
NOTE: Power meter readings is a licensed feature and requires the Advanced Pack license.
The Power Meter Readings page has two sections: Power Meter Readings and 24-hour Power
History.
Web GUI 105