Filter
Top Products
</>hpiLO-> reset system1
status=0
status_tag=COMMAND COMPLETED
system1 has been issued a reset
Displaying Power Status
To display the power state of the system, query the value of the enabledstate property of the
system1 target. For example:
</>hpiLO-> show -d properties=enabledstate system1
status=0
status_tag=COMMAND COMPLETED
/system1
Properties
EnabledState=Enabled
Powering Off the System
To power off the system, apply the stop (graceful shutdown) or stop-force (power off)
commands to the system1 target. For example:
</system1> hpiLO-> stop -f
status=0
status_tag=COMMAND COMPLETED
System is being powered off.
</system1> hpiLO-> stop
status=0
status_tag=COMMAND COMPLETED
system has been requested graceful shutdown.
Powering On the System
To power on the system, apply the start command to the system1 target. For example:
</>hpiLO-> start system1
status=0
status_tag=COMMAND COMPLETED
system1 has been powered on
Map1 (iLO 2) Target
Target: map1
The map1 target (management access point) represents the root of the iLO 2 MP namespace.
Functions and information related to iLO 2 MP are located under the map1 target.
Table 6-33 shows map1 target properties.
Table 6-33 map1 Properties
Access and ValuesDescriptionProperty Name
Read-only
Set to management.
Indicates whether the computer
system is a special purpose system
(for example, dedicated to a
particular use), or a
general-purpose system.
Dedicated
Read-only
Set to iLO 2 Advanced, HP Integrity.
Name that identifies the iLO 2 MP.Name
Verbs
show Displays information.
help Displays context-sensitive help.
SMASH Server Management Command Line Protocol 131