Filter
Top Products
HE (Help): Display help for the menu or command in the MP Main Menu
HE displays the MP hardware and firmware version identity, and the date and time of firmware
generation. If executed from the MP Main Menu, HE displays general information about the iLO
2 MP, and those commands available in the MP Main Menu. If executed in command mode, HE
displays a list of Command menu commands available. It also displays detailed help information
in response to a topic or command at the help prompt.
X (Exit): Exit the iLO 2 MP
X exits you from the MP Main Menu. If the terminal is the local serial port, the login prompt
appears. For all other types of terminals, you are disconnected from the iLO 2 MP.
Command Menu
The Command menu provides you with a set of standard command line interface commands
that help monitor and manage the server.
Table 6-5 lists the Command Menu commands.
Table 6-5 Command Menu Commands
DescriptionCommand
Resets the BMC passwords
BP
Displays blade parameters
NOTE: This command is available only on a server blade.
BLADE
Configures asynchronous local serial port
CA
Displays the current date
DATE
Resets all parameters to default configuration
DC
Displays field replaceable unit (FRU) information
DF
Disconnects the LAN console
DI
Sets the DNS configuration
DNS
This command is only available to authorized HP service personnel
FW
Displays help for the menu or command
HE
Displays or modifies system information
ID
Modifies the iLO 2 MP inactivity timeouts
IT
Displays the LAN configuration
LC
Displays the LDAP configuration
LDAP
License management
LM
Displays and configures locator LED
LOC
Displays the LAN status
LS
Remote power control
PC
Remote power mode control
PM
Configures the power restore policy
PR
Displays the power management module status
PS
Resets the BMC
RB
Resets the system through the RST signal
RS
Text User Interface 63