Filter
Top Products
Table 6-5 Command Menu Commands (continued)
DescriptionCommand
Sets access options
SA
Configures SNMP parameters
SNMP
Configures security options
SO
Displays system processor status
SS
Displays all firmware revisions
SYSREV
Resets through transfer of control (TOC)
TC
“Tell” (sends a message to other users)
TE
Displays a user configuration
UC
Displays connected the iLO 2 MP users
WHO
Diagnoses or resets the iLO 2 MP
XD
The following is a quick reference list that provides MP Command mode activities:
To access the Command menu, enter CM at the MP Main Menu.
To see all the available commands, enter HE LI at the MP:CM> prompt.
To access the Command menu help, enter HE at the MP:CM> prompt. The Command menu help
provides information on all the Command menu items.
To modify the inactivity timeout, enter the IT command. The inactivity timer aborts a command
if you do not complete it within a certain time period.
To abort most commands, enter Q at the point when the iLO 2 MP is asking for input.
To return to the MP Main Menu from any of these commands, press Ctrl-B.
Command Line Interface Scripting
A command line interface is provided for all commands to assist you in scripting. This section
provides syntax examples used in the iLO 2 MP command-line or scripted interface.
Typically, tools like Expect (see “Expect Script Example” (page 65)) and (http://expect.nist.gov/)
are used to string together several commands to accomplish a task. These scripting tools enable
you to write a script for one iLO 2 MP, and use it to apply the same commands to additional iLO
2 MPs. Scripting tools have capabilities that enable you to do the following:
• Write scripts that make decisions based on the output of commands
• Use variables in the script to customize it for each target automatically
• Compensate for delays in output
Scripting tools and the command-line interfaces enable you to carry out commands to multiple
iLO 2 MPs such as setting the IP address on 10 iLO 2 MPs pulled from a list of 10 IP addresses
read from a file local to your script. To automatically administer any part of the system during
any stage of its operation, you can use the scripting tool to log in to the iLO 2 MP, access the
console, and send and receive commands in EFI or the OS.
64 Using iLO 2 MP