Filter
Top Products
NOTE: If SNMP was disabled earlier and then enabled, you will receive the following message:
Reset MP (XD command option ‘R’) for configuration to take effect.
Click OK and reset the iLO 2 MP.
BL c-Class
The Onboard Administrator page (Figure 6-30) is used to facilitate the cabling and initial
installation of servers blade. It also provides a quick view of the enclosure status. You must have
configuration access right to turn the enclosure locator UID LED on or off.
Figure 6-30 Onboard Administrator
NOTE: The BL c-Class tab is available only on HP Integrity server blades.
Table 6-28 lists the fields and descriptions.
Table 6-28 Onboard Administrator Page Description
DescriptionField
The IP address of the onboard administrator.OA IP Address
The MAC address of the onboard administrator.OA MAC Address
Click this button to launch the Onboard Administrator Sign In page.Active OA Sign In Page
This is used to logically group together enclosures in a rack. The rack name is shared
with the other enclosures in the rack.
Rack Name
This is the rack unique identifier.Rack UID
The enclosure can support as many as eight HP Integrity server blades. When viewed
from the rack front, the bays are numbered from left to right and from 1 to 8. The bay
number is used to locate and identify a server blade.
Bay Number
Web GUI 121