Filter
Top Products
Table 6-28 Onboard Administrator Page Description (continued)
DescriptionField
This is used to logically group together the server blades installed in the same enclosure.
The enclosure name is shared with the other servers in the enclosure.
Enclosure Name
This displays the health of the enclosure.Enclosure Health
This allows you to turn the enclosure Locator UID LED on or off. The iLO Configuration
access right is needed. If a user does not have sufficient rights, the button is disabled.
Enclosure Locator UID LED
Before setting up the HP BladeSystem OA, HP recommends that you read the HP BladeSystem
Onboard Administrator User Guide on the HP website at:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf
Reading this guide ensures that you will obtain an overall understanding of the HP BladeSystem
OA and that you properly complete the initial setup to facilitate proper functioning of the OA.
The HP BladeSystem Onboard Administrator User Guide provides the following information in
detail:
• Access Requirements
• Running OA for the first time
• Signing in to the OA GUI
• Running the setup wizard
• Using online help
• Changing enclosure and device configurations
• Recovering the administrator password
• Flash disaster recovery
Help
The iLO 2 MP has a robust help system.
To access iLO 2 MP help, click the Help tab.
122 Using iLO 2 MP