Filter
Top Products
2 Ports and LEDs
All iLO 2 MP functions are available through the server iLO 2 MP LAN port and the local and
remote serial ports. On HP Integrity server blades, all iLO 2 MP functions are available on the
Onboard Administrator. This chapter describes the available iLO 2 MP ports, connectors, and
LEDs on the HP Integrity server blades, and the rx2660, rx3600, and rx6600 servers.
This chapter addresses the following topics:
• “HP Integrity Server Blade Components” (page 27)
• “HP Integrity rx2660 Server Components” (page 29)
• “HP Integrity rx3600 and rx6600 Server Components” (page 29)
• “iLO 2 MP Reset Button” (page 31)
• “Console Serial Port and Auxiliary Serial Port” (page 31)
HP Integrity Server Blade Components
Onboard Administrator is the enclosure management processor, subsystem, and firmware base
used to support the HP Integrity server blades and all the managed devices contained within
the enclosure. Onboard Administrator provides a single point from which to perform basic
management tasks on server blades or switches within the enclosure. Using this hardwired
knowledge, Onboard Administrator performs initial configuration steps for the enclosure, enables
runtime management and configuration of the enclosure components, and informs you of
problems within the enclosure through e-mail, SNMP, or the Insight Display.
Before setting up the HP BladeSystem Onboard Administrator, HP recommends that you read
the HP BladeSystem Onboard Administrator User Guide on the HP website at:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf
Reading this guide ensures that you understand the HP BladeSystem Onboard Administrator
and that you properly complete the initial setup to facilitate its proper functioning.
You can find other Onboard Administrator docs on the HP website at:
HP BladeSystem c-Class Onboard Administrator
Onboard Administrator
Figure 2-1 shows the Onboard Administrator OA/iLO network port and components.
HP Integrity Server Blade Components 27