Filter
Top Products
XD performs simple checks to confirm the iLO 2 MP health and its connectivity status. The
following tests are available:
• iLO 2 MP Parameter Checksum in NVRAM
• Verify I2C connection (get BMC device ID)
• LAN connectivity test using the ping command
• History of firmware updates and other activities
You can use the XD command plus its R command option to reset the iLO 2 MP. You can safely
perform an iLO 2 MP reset without affecting the operation of the server.
You can also reset the iLO 2 MP through the web interface or by pressing the iLO 2 MP reset
button.
Command line usage and scripting:
XD -parameter | -i2c |-lan <ipaddr> | -reset | -hist ] [ -nc ]
-?
Web GUI
This section describes the functions and features of the web graphical user interface (GUI).
Some of the functionality in the web GUI only display if you have the iLO 2 MP Advanced Pack
license. For more information on the iLO 2 MP Advanced Pack license, see “Advanced Pack
License” (page 23) and the HP website at:
http://h71028.www7.hp.com/enterprise/cache/279991-0-0-0-121.html
NOTE: Cookies must be enabled on the web browser in order to successfully login to the iLO
2 MP web GUI.
System Status
The System Status tab enables you to access the following pages:
• Status Summary: General and Active Users
• Server Status: General and Identification
• SEL
Status Summary > General
The Status Summary General page (Figure 6-2) displays a brief status summary of the system.
82 Using iLO 2 MP