Filter
Top Products
commands that require a password can have that password entered on the command line
(FW, UC).
If -nc is specified on a command with no other parameters or with only a specific multilevel
selector, the command displays all or just the specific multilevel parameters. The absence
of a specific multilevel parameter on a command that has multilevels causes all the multilevel
parameters to display.
• Most commands accept -all default. This causes all parameters for that command to
be set to their default values.
• In some multilevel commands, you can use default to set that level to its default values.
• Further use of default on many individual parameters causes that parameter to be set to
its default value.
• -? (MP command-specific help) is optional. If you enter -? by itself with the command, a
usage display appears. In the event of an incorrect command line usage, in addition to the
error message, the usage display appears.
• Arguments in brackets [ ] are optional.
• Without arguments, the system prompts you for answers to questions.
• Entering a command without parameters takes you through the command interactively and
prompts you for all the options.
BP: Reset BMC passwords
Command access level: MP configuration access
BP resets the BMC user and administrator passwords.
Command line usage and scripting:
BP [ -nc ]
-?
See also: DC, RB, UC
BLADE: Display BLADE parameters
NOTE: This command is available only on a server blade.
Command access level: Login access
BLADE facilitates the cabling and initial installation of HP Integrity server blades. It also provides
a quick view of the enclosure status. You must have configuration access right to turn the enclosure
locator UID LED on or off.
Onboard Administrator Configuration
OA IP Address IP address of the Onboard Administrator.
OA MAC Address MAC address of the Onboard Administrator.
Server Blade Configuration
Rack Name Logically groups together enclosures in a rack. The rack name is shared with
the other enclosures in the rack.
Rack UID Rack unique identifier.
Bay Number The blade enclosure can support up to eight HP Integrity server blades. When
viewed from the rack front, the bays are numbered from left to right, from 1 to
8. The bay number is used to locate and identify a blade.
Enclosure Information
Enclosure Name Logically groups together the server blades installed in the same enclosure.
The enclosure name is shared with the other server blades in the enclosure.
Health Indicates one of three states of health of this enclosure.
Text User Interface 67