Filter
Top Products
splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the
back.)
Figure 3-10 Example of a parallel splitter
• If your computer has two phone ports, set up the HP Photosmart as described below.
Figure 3-11 Back view of the HP Photosmart
1 Telephone wall jack
2 "IN" phone port on your computer
3 "OUT" phone port on your computer
4 Telephone (optional)
5 Answering machine
6 Computer with modem
7 Use the phone cord supplied in the box with the HP Photosmart to connect to the "1-LINE"
port
To set up the HP Photosmart on the same phone line as a computer with two phone
ports
1. Remove the white plug from the port labeled 2-EXT on the back of the HP Photosmart.
2. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall
jack and plug it into the port labeled 2-EXT on the back of the HP Photosmart.
Chapter 3
32 Finish setting up the HP Photosmart
Finish setting up the HP Photosmart