Filter
Top Products
• Directly connected to the HP Photosmart (on the 2-EXT port)
• On the same phone line, but not directly connected to the HP Photosmart
To receive a fax manually
1. Make sure the product is turned on and you have paper loaded in the input tray.
2. Remove any originals from the document feeder tray.
3. Set the Rings to Answer setting to a high number to allow you to answer the incoming
call before the product answers. Or, turn off the Auto Answer setting so that the
product does not automatically answer incoming calls.
4. If you are currently on the phone with the sender, instruct the sender to press Start
on their fax machine.
5. When you hear fax tones from a sending fax machine, do the following:
a. Press Start Fax on the control panel.
b. When prompted, press the down arrow button to highlight Receive Fax
Manually, and then press OK.
6. After the product begins to receive the fax, you can hang up the phone or remain on
the line. The phone line is silent during fax transmission.
Related topics
Stop the current job
Receive a fax 93
Fax