138 Removing and replacing parts Q2431-90912
Transfer roller
1. Open the control-panel door and tray 1.
CAUTION Do not touch the black rubber on the roller. Skin oils on the roller can cause print-quality problems.
The use of disposable gloves is recommended when you remove the transfer roller.
2. Use a flat-blade screwdriver to lift the left end of the metal shaft out of place near the blue
gear. Slide the transfer roller to the left to remove it.
Figure 61. Transfer roller
Reinstall note When you install the transfer roller, make sure that the black collar on the left side is oriented
correctly, with the open end face down (the solid end is face up).