220 Removing and replacing parts Q2431-90912
1,500-sheet feeder control PCA
1. Remove the following assemblies
● Door. See “1,500-sheet feeder door” on page 215.
● Rear and right-side covers. See “1,500-sheet feeder rear cover” on page 217 and
“1,500-sheet feeder right-side cover” on page 218.
2. Unplug six wire-harness connectors (callout 1).
Figure 191. 1,500-sheet feeder control PCA (1 of 2)
3. Remove two screws (callout 2). Use a pair of needle-nose pliers to squeeze the top of one of
the nylon PCA tabs (callout 3). Gently pop the PCA off of the tab. Repeat the procedure on
the remaining tab. Remove the PCA.
Figure 192. 1,500-sheet feeder control PCA (2 of 2)
11
2
3
2
3