Q2431-90912 Chapter 6 Removing and replacing parts 143
Covers, tray 1, and the rear output bin
Accessory covers and the tray 2 extension door
Note Accessory covers will not be in place if any installed accessories (for example, the optional
stapler/stacker) have been removed to service the printer.
1. Grasp the top accessory cover (the mounting position for the optional stapler/stacker or
stacker). Rotate the cover toward the front of the printer to release it, and then lift it up to
remove it.
Figure 69. Accessory covers (1 of 4)
2. Open tray 1. Grasp the front accessory cover (the mounting position for the optional
envelope feeder) and pull it straight out of the printer.
Figure 70. Accessory covers (2 of 4)