HP (Hewlett-Packard) 410 All in One Printer User Manual


 
reference guide
use copying features
17
You can use the automatic document feeder (ADF) to load the originals or place
them directly on the glass.
1 Place the first original in the front-right corner on the glass. If you are using
the ADF, load both originals there.
2 Press Special Features until 2 on 1 59% appears, and then press Enter.
3 If you want to produce multiple copies of the page, use the keypad to enter
the number of copies you want to make, and then press Enter.
4 Press Start Copy, Black or Start Copy, Color.
5 After the first original has been scanned, you will be prompted to Place
2nd original on glass, and then press Enter.
If you selected to make multiple copies in step 3, the HP Digital Copier
Printer scans the originals once, then stores the information in its memory to
make your 2 on 1 copies.
shift image to increase the margin
The MarginShift feature lets you shift the image to the left or right to increase the
margin for binding. You can also adjust the image size, if necessary, by entering
a number on the numeric keypad.
1 Load the original on the glass or in the ADF.
2 Press Special Features until MarginShift 100% appears.
3 Press or to shift the margin to the left or to the right. Each step is a
¼-inch (6.35 mm) shift.
4 If you wish to change the reduction/enlargement percentage as well, use
the keypad to enter a number, or press the + and – keys to increment the
percentage value, and then press Enter.
Tip: If you do not wish to change the reduction/enlargement
percentage, press Enter after you have selected the amount of
MarginShift you want.
5 Press Start Copy, Black or Start Copy, Color.
Origina
l
MarginS
h
i
f
t