Hitachi SJ200 Series Power Supply User Manual


 
Using Intelligent Input Terminals
Operations
and Monitoring
4–10
The two diagrams below show input wiring circuits using the inverter’s internal +24V
supply. Each diagram shows the connection for simple switches, or for a field device
with transistor outputs. Note that in the lower diagram, it is necessary to connect
terminal [L] only when using the field device with transistors. Be sure to use the correct
SR/SK switch position shown for each wiring diagram.
SJ200
L
24V
+
SK
SR
SK
SR
PCS
Input
circuits
1
6
Logic GND
1
6
GND
Open collector outputs,
NPN transistors
Input
switches
Sinking Inputs, Internal Supply
SR/SK switch = SK position
Field device
SJ200
L
24V
+
SK
SR
SK
SR
PCS
Input
circuits
1
6
Common,
to [PCS]
1
6
GND
PNP transistor
sourcing outputs
Input
switches
Sourcing Inputs, Internal Supply
SR/SK switch = SR position
Field device
to PNP bias
circuits
Logic GND