Filter
Top Products
Chapter 5. Management 143
Table 5-2 shows you the possible choices when you click Adapter Keying.
As you click the button, both the graphic and the bus width and voltage
pull-down menu entries change.
Table 5-2 Adapter attributes and associated graphics
2. Review the documentation that is included with the adapter to determine its
characteristics. In our case, they are:
– PCI-X 66 MHz
– 64 bit
– Dual voltage
– No PME signal
– Full height (that is, not low profile)
– Half length
Note: Clicking the Adapter Keying button only changes the bus width
and voltage pull-down menus. The other fields (maximum speed, PME,
low profile, and half length) must be set manually.
Attributes Graphic
Bus width: 64-bit
Voltage: dual (3.3 V and 5 V)
Bus width: 64-bit
Voltage: 3.3 V
Bus width: 32-bit
Voltage: Dual (3.3 V and 5 V)
Bus width: 64-bit
Voltage: 5 V
Note: 5 V adapters are not support in the
x440 and RXE-100
Bus width: 32-bit
Voltage: 5 V
Note: 5 V adapters are not support in the
x440 and RXE-100