Filter
Top Products
ii CMX158886 cpuModule BDM-610000049 Rev G
CMX158886 cpuModules™ User’s Manual
RTD Document Number: BDM-610000049 Revision G
Copyright © 2008 RTD Embedded Technologies, Inc. All rights reserved.
Trademarks
Advanced Digital I/O, aDIO, a2DIO, Autonomous SmartCal, cpuModule, dspFramework, dspModule, IDAN, HiDAN,
HiDANplus, “MIL Value for COTS prices”, multiPort, and PC/104EZ are trademarks, and “Accessing the Analog World”,
dataModule, RTD, and the RTD logo are registered trademarks of RTD Embedded Technologies, Inc. PS/2, PC/XT,
PC/AT, and IBM are trademarks of International Business Machines Inc. MS-DOS, Windows, Windows 95, Windows 98,
and Windows NT are trademarks of Microsoft Corporation. Linux is a registered trademark of Linus Torvalds.
ROM-DOS is a trademark of Datalight, Inc. Intel is a registered trademark of Intel Corporation. PC/104 is a registered
trademark of PC/104 Consortium. All other trademarks appearing in this document are the property of their respective
owners.
Contents and specifications within this manual are subject to change without notice.
Revision History
Revision Date Reason for Change
A 12/13/06 Initial release
B 07/26/06 Added section to Chapter 3 with instructions for installing an ATA/IDE Disk Chip
Removed the “Preliminary” tag on the cover sheet
Added section describing proper grounding techniques
C 10/02/06 Added block diagrams to Appendix C to show the dimensions and connectors of the IDAN
CMX158886 that includes a PCI to ISA bridge board
Added “Network Boot” bullet to list of board features
Removed references to 1.1 GHz Pentium M processor
D 11/29/06 Described +3.3 V source for FP_VCC, and added footnote for DDC signals (see Table 13 on page 33)
Added section to Chapter 4: DVMT Mode Select—page 79
Removed table describing solder jumpers (see footnote of Table 62 on page 87)
Added height of Mini Fan Heatsink (see Physical Dimensions on page 89)
Made correction to IDAN SVGA connector pinout table (see Table 71 on page 101)
Added dimension of heatsink fins on IDAN frames (see page 96 and page 104)
E 2/23/07 Removed Thermal Throttling. Corrected multiPort Floppy setup. Removed EEPROM section.
Updated board name.
F 1/9/08 Added 1024 MB versions. Combined PX and CX manuals. Added support for dual serial ports.
Corrected storage temperatures.
G 5/21/08 Corrected Table 26, COM A (RS-422/485) and COM B (RS-422/485)—41
Added User EEPROM on page 80
Corrected aDIO Connector in Figure 10, IDAN-CMX158886-BRG Connectors—104
Added information for ECC verison.