Filter
Top Products
BDM-610000049 Rev G Chapter 3: Connecting the cpuModule 27
Facing the connector pins, the pinout of the Auxiliary Power connector is:
Note The +3.3 V pins (10 and 12) on the auxiliary power connector (CN3) are connected to the +3.3 V
pins on the PC/104-Plus bus by default. These pins are also configured to supply +3.3V to FP_VCC on the
LVDS Flat Panel Video connector (CN19).
Note For more information on configuring the +3.3V pins on the auxiliary power connector (CN3) the
PCI bus connector (CN16), or the LVDS FLat Panel Video connector (CN19), contact RTD Technical
Support.
1197531
PSON# GND GND Reserved +5V_STDBY GND
+3.3 V +3.3 V +5 V –12 V +12 V +5 V
12108642