Filter
Top Products
36 CMX158886 cpuModule BDM-610000049 Rev G
c. Save the settings in the BIOS setup
3. Remove power from the system.
4. Insert the Disk Chip in the ATA/IDE Disk Chip Socket (U16) aligning pin 1 with the square solder pad
on the board.
5. Apply power to the system.
6. Re-enter the BIOS and set the boot order of the system accordingly.
Figure 5 CMX158886 before and after ATA/IDE Disk Chip Installation
WARNING The preceding steps should be performed before installing the Disk Chip in the ATA/IDE Disk
Chip Socket. These steps ensure that the system is properly configured for the correct device and supply
voltage, so neither the Disk Chip or cpuModule are damaged.
ATA/IDE Disk Chip Socket (U16)
Pin 1 indicated by arrow
ATA/IDE Disk Chip
Pin 1 indicated by arrow