IBM DS3200 Storage Subsystem Tablet Accessory User Manual


 
Chapter 2. Installing the storage subsystem
This chapter provides the information about installing the storage subsystem into a
rack cabinet.
Before you begin the installation, review the safety information in “Safety” on page
xi and “Handling static-sensitive devices” on page 19.
“Installation overview” on page 18 provides an overview of the entire DS3200
installation process. Read this overview before you begin the installation.
Inventory checklist
After you unpack the DS3200, make sure that you have the following items.
Depending on your DS3200 order, your shipping box might contain additional
materials that are not in the following list.
v Hardware
Hard disk drive filler panels (12) (Your storage subsystem might come with up
to 12 hard disk drives.)
RAID controllers (up to 2)
Power supplies (2)
Power cables (2 jumper line cords)
Rack-mounting hardware kit (1), including:
- Rails (2) (right and left assembly)
- Rail end plate covers (2) (right and left assembly)
- M5 black hex-head slotted screws (12)
- Washers (8)
Attention: The DS3200 does not come with region-specific power cords. You
must obtain the IBM-approved power cords for your region. See “Power cords”
on page 106 for the IBM-approved power cords for your region.
v Software and documentation
IBM System Storage DS3000 Support CD
The support CD contains the IBM DS3000 Storage Manager Version 2 host
software. The CD also includes firmware, online help, and the following
documentation in Adobe Acrobat Portable Document Format (PDF):
- IBM System Storage DS3200 Storage Subsystem Installation, User’s, and
Maintenance Guide (this document)
- IBM System Storage DS3000 Storage Manager Version 2 Installation and
Support Guide for your operating system
- IBM Systems Safety Notices
IBM System Storage DS3200, DS3300, and DS3400 Quick Installation Guide
Rack Installation Instructions
Instructions for installing the DS3200 in a rack cabinet are provided in the
Rack Installation Instructions document.
Box of ID labels (used to label the enclosure IDs on the front of the DS3200)
If you ordered additional premium features or entitlements, the premium features
activation or entitlement kits might also come inside the box.
© Copyright IBM Corp. 2006, 2009 17