Filter
Top Products
4. Remove the controller from the chassis.
a. On the left side of the controller, press the orange release tab to the right
just enough to release the handle; then, rotate the handle upward.
b. Slowly pull the handle away from the chassis to remove the controller from
the bay, as shown in Figure 42.
c. Turn over the controller and lay it on a flat, static-protective surface.
5. Remove the two screws that connect the SAS host port adapter filler panel to
the controller and lift the filler panel out of the controller. Set the screws aside.
6. Touch the static-protective package that contains the SAS host port adapter to
any unpainted metal surface on the DS3200; then, remove the adapter from
the package.
Handle
Guide pin
Notch
Figure 42. Removing and replacing controller A
SAS host port adapter filler panel
Screws
Figure 43. Removing the SAS host port adapter filler panel
70 System Storage DS3200 Storage Subsystem: Installation, User’s, and Maintenance Guide