IBM SC33-1683-02 Server User Manual


 
IC_ADDR1
is the address of one of the following:
v An 8-byte area containing the value of the INTERVAL keyword (or TIME
keyword if IC_EIDOPT7 indicates that TIME is specified).
v An 8-byte area containing the value of REQID (if the request is CANCEL).
v Data returned for INTO (if the request is RETRIEVE, and if IC_EIDOPT5
indicates that this is not SET).
v A 4-byte address returned for SET (if the request is RETRIEVE and
IC_EIDOPT5 indicates that this is SET).
IC_ADDR2
is the address of one of the following:
v An 8-byte area containing the value of REQID (if the request is DELAY,
POST or START).
v A halfword containing the value of LENGTH (if the request is RETRIEVE).
Warning: For requests that specify INTO, do not change the value of
LENGTH to a value greater than that specified by the application. To do so
causes a storage overlay in the application.
IC_ADDR3
is the address of one of the following:
v An area containing the value of TRANSID (if the request is CANCEL or
START).
v A 4-byte address returned for SET (if the request is START or POST and
IC_EIDOPT5 indicates that this is SET).
IC_ADDR4
is the address of an area containing the data from FROM.
IC_ADDR5
is the address of the halfword value of LENGTH.
Warning: For requests that specify INTO, do not change the value of LENGTH
to a value greater than that specified by the application. To do so causes a
storage overlay in the application.
IC_ADDR6
is the address of an area containing the value of TERMID.
IC_ADDR7
is the address of an area containing the value of SYSID.
IC_ADDR8
is the address of an area containing the value of RTRANSID.
IC_ADDR9
is the address of an area containing the value of RTERMID.
IC_ADDRA
is the address of an area containing the value of QUEUE.
IC_ADDRB
is the address of an area containing the value of HOURS.
IC_ADDRC
is the address of an area containing the value of MINUTES.
IC_ADDRD
is the address of an area containing the value of SECONDS.
interval control EXEC interface program exits
Chapter 1. Global user exit programs 141