Filter
Top Products
If you do not set this field, the autoinstall routine uses the language defined in
the model, if one is specified. However, when control is passed to the program,
CICS determines the language from the program itself, and overrides any
specification provided.
You should not need to specify the language of executable programs that have
been translated using the EXEC CICS translator before compiling.
PGAC_CEDF_STATUS
allows you to specify, in a 1-byte field, the execution diagnostic facility (EDF)
status of the program to be autoinstalled. The equated values are:
PGAC_CEDF_YES
EDF can be used with this program.
PGAC_CEDF_NO
EDF cannot be used with this program.
PGAC_DATA_LOCATION
allows you to specify, in a 1-byte field, the data location for task-lifetime storage.
The equated values are:
PGAC_LOCATION_BELOW
Task-lifetime storage must be located below 16MB.
PGAC_LOCATION_ANY
Task-lifetime storage can be below or above 16MB.
PGAC_EXECUTION_KEY
allows you to specify, in a 1-byte field, the execution key for the program. The
equated values are:
PGAC_CICS_KEY
The program is to execute in CICS key.
PGAC_USER_KEY
The program is to execute in user key.
PGAC_LOAD_ATTRIBUTE
allows you to specify, in a 1-byte field, the load attributes for the object. The
equated values are:
PGAC_RELOAD
CICS is to load a fresh copy of the object for each request.
PGAC_RESIDENT
CICS is to make the object permanently resident.
PGAC_TRANSIENT
The storage for this object is to be released whenever the use count
reaches zero.
PGAC_REUSABLE
CICS can use any copy of the object currently in storage.
PGAC_USE_LPA_COPY
allows you to specify, in a 1-byte field, whether CICS is to use an LPA-resident
copy of the program. The equated values are:
PGAC_LPA_YES
CICS is to use a copy from the LPA.
the autoinstall control program for programs
544
CICS TS for OS/390: CICS Customization Guide