Filter
Top Products
name4
The name of a location containing a 4-byte token obtained from a
previous INQUIRE_PROGRAM, INQUIRE_CURRENT_PROGRAM,
START_BROWSE_PROGRAM, or GET_NEXT_PROGRAM call.
PROGRAM_TYPE(PRIVATE|SHARED|TYPE_ANY)
specifies where the program is to be loaded from.
PRIVATE
The program is in the relocatable program library (RPL). A PRIVATE
program need not be reentrant, and is given only limited protection
against unauthorized overwriting. The degree of protection depends on
the type of dynamic storage area into which the program is loaded (see
the description of the PROGRAM_TYPE option of the
DEFINE_PROGRAM call).
SHARED
The program is located in the link pack area (LPA), is reentrant, and is
protected.
TYPE_ANY
Either the RPL or the LPA copy of the program can be used, though
preference is given to the LPA copy.
PROGRAM_USAGE(APPLICATION|NUCLEUS)
specifies whether the program is used as a CICS nucleus program or as a user
application program.
REQUIRED_AMODE(24|31|AMODE_ANY)
specifies the addressing mode of the program. If, during subsequent
processing, no copy of the program that meets the defined addressing
requirement can be found, an exception occurs.
Notes:
1. AMODE_ANY and 31 have identical meanings for this function.
2. You cannot use this option to override the link-edited addressing mode of
the program.
REQUIRED_RMODE(24|AMODE_ANY)
specifies the residency mode of the program (that is, whether it is to be loaded
above or below the 16MB line). If, during subsequent processing, no copy of
the program that meets the defined residency requirement can be found, an
exception occurs.
Note: You cannot use this option to override the link-edited residency mode of
the program.
program management functions
Chapter 3. The user exit programming interface (XPI) 345