Filter
Top Products
* Update the Sysid in CLPS
ROUTE1 DS 0H
MVC SHARED_SYSID,NEW_SYSID Copy SYSID into shared storage
L R8,UEPCLPS Address the CLPS..
USING TS_ADDR_LIST,R8 ..with Register 8
L R1,TS_ADDR0 Address the EID..
USING TS_EID,R1 ..with Register 1
OI TS_BITS1,TS_SYSID_V Indicate SYSID now present in CLPS
DROP R1 Drop addressability to EID
LA R1,SHARED_SYSID Fetch address of the new SYSID
ST R1,TS_ADDR7 Store address in TS_ADDR7
OI TS_ADDR7,X'80' Indicate SYSID is end of plist
*
* Clear hi-order bits in ARGs 1 to 5
NI TS_ADDR1,X'7F' Indicate not last parameter in CLPS
NI TS_ADDR2,X'7F' Indicate not last parameter in CLPS
NI TS_ADDR3,X'7F' Indicate not last parameter in CLPS
NI TS_ADDR4,X'7F' Indicate not last parameter in CLPS
NI TS_ADDR5,X'7F' Indicate not last parameter in CLPS
B RETURN Return
DROP R8 Drop TS_ADDR_LIST
DROP R12 Drop SHARED_STORAGE
DROP R9 Drop addressability to Entry
EJECT ,
*
*=====================================================================*
* ENTRY_NOT_FOUND - No entry was found in the TS_Routing_Table *
* No entry found in Routing Table for this TS Queue Name. In the *
* sample program, all such requests are routed. *
* *
* Registers: *
* R1 = Work register *
* R6 = Link Register *
* R8 = Command Parameter List (CLPS) *
* R12= Work register (Shared_storage) *
* *
Figure 113. Example exit program for the XTSEREQ exit (Part 10 of 16)
example XTSEREQ global user exit program
816
CICS TS for OS/390: CICS Customization Guide