Filter
Top Products
General information 7
Server controls and indicators
CD-ROM drive activity light: When this light is on, it indicates that the CD-ROM
drive is in use.
Diskette eject button: Push this button to install or remove a diskette from the drive.
Diskette drive activity light: When this light is on, it indicates that the diskette drive
is in use.
Hard disk drive activity light: When this light is on, it indicates that the hard disk
drive is in use.
Power-on light: This status indicator lights when you turn on your server.
Power control button: Press this button to manually turn the server on or off.
See “I/O connector locations” on page 60 for the location of the input/output (I/O)
connectors on the rear of the server.
Turning on the server
After you plug one end of the server power cord into the power supply outlet on the
rear of the server, and the other end of the power cord into an electrical outlet, the
server can start as follows:
• You can press the power control button on the front of the server to start the
server.
• If the server is turned on and a power failure occurs, the server will start
automatically when power is restored.
CD eject
button
CD-ROM drive
activity light
Diskette eject
button
Hard disk drive
activity light
Power-on
light
Power control
button
Diskette drive
activity light
Ethernet speed 100 Mbps
Ethernet transmit/
receive activity