IBM x Series 200 Computer Drive User Manual


 
FRU information (service only) 81
To remove the top/side cover, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the cover (see Removing the side cover on page 40).
4. Remove the front bezel (see Removing the bezel on page 41).
5. Remove the handle assembly (see Handle assembly).
6. Remove the four screws from the back of the server and put them in a safe place.
7. Using a screwdriver, gently pry the cover away from the server in the rear and
slide the unit away from the server.
Handle assembly
Before you begin:
Read Safety information on page 105.
Review the information in Before you begin on page 38.