IBM xSeries 330 Server User Manual


 
Chapter 3. Diagnostics 17
1. Turn on the server and watch the screen.
If the server is on, shut down your operating system and restart the server:
2. When the message F2 for Diagnostics appears, press F2.
If a power-on password is set, the server prompts you for it. Type in the
appropriate password; then, press Enter.
3. When the Diagnostic Programs screen appears, select Utility from the top of the
screen.
4. Select View Test Log from the list that appears; then, follow the instructions on
the screen.
The system maintains the test-log data while the server is powered on. When you
turn off the power to the server, the test log is cleared.