Filter
Top Products
Chapter 7. Symptom-to-FRU index 91
129 (Internal cache error) 1. Processor
2. Optional Processor (if installed)
3. System Board.
151 (Real time clock error) 1. Run Diagnostics
2. Battery
3. System Board
161 (Real time clock battery error) 1. Run Configuration/Setup
2. Battery
3. System Board
162 (Device Configuration Error)
Note: Be sure to load the default settings
and any additional desired
settings; then, save the
configuration.
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board
163 (Real-Time Clock error) 1. Run Configuration/Setup
2. Battery
3. System Board
164 (Memory configuration changed,
see "Memory settings" on page 33.)
1. Run Configuration/Setup
2. DIMM
3. System Board.
165(Service Processor failure) 1. System Board.
175 (Hardware error) 1. System Board
176 (Computer cover or cable cover was
removed without a key being used)
1. Run Configuration/Setup
2. System Board
177, 178 (Security hardware error) 1. Run Configuration/Setup
2. System Board
184 (Power-on password corrupted) 1. Run Configuration/Setup
2. System Board
185 (Drive startup sequence
information corrupted)
1. Run Configuration/Setup
2. System Board
186 (Security hardware control logic
failed)
1. Run Configuration/Setup
2. System Board
187 (VPD serial number not set.) 1. Set serial number in Setup
2. System Board
188 (Bad EEPROM CRC #2) 1. Run Configuration/Setup
2. System Board
189 (An attempt was made to
access the server with invalid passwords)
1. Run Configuration/Setup, enter the administrator password
Error Code/Symptom FRU/Action