Filter
Top Products
80 Hardware Maintenance Manual: xSeries 330
2. Remove the cover. See “Removing the cover” on page 44.
3. Disconnect the cables that connect the power supply to the system board.
4. Remove the screws (2) from the side of the chassis.
5. Remove the screws at the back of the chassis and power supply.
6. Slide the power supply away from the side of the chassis and lift up to remove.
PCI riser card
To remove the PCI riser card:
Note: Read“Safety information” on page 107 and “Before you begin” on page 42.
1. Power off the server.
2. Remove the cover. See “Removing the cover” on page 44.
3. Remove any adapters and put them in a safe place.
4. Disconnect cables.
5. Gently lift up on the card to disconnect it from the system board port.
System board
To remove the system board:
Note: Read“Safety information” on page 107 and “Before you begin” on page 42.
1. Power off the server.
2. Remove the cover. See “Removing the cover” on page 44.
3. Disconnect all cables from the system board.