Filter
Top Products
Alphabetic Function Lists
Version 1.10 12/01/02 K-23
Table K-2. Functions Listed Alphabetically within a Service or Protocol (continued)
Service or Protocol Function Function Description
CreateThunk Creates a thunk for an EBC image entry point or
protocol service, and returns a pointer to the thunk.
RegisterCacheFlush Called to register a callback function that the EBC
interpreter can call to flush the processor instruction
cache after creating thunks.
EFI Byte Code Protocol
UnloadImage
Called when an EBC image is unloaded to allow the
interpreter to perform any cleanup associated with the
image’s execution.
GetControllerName Retrieves a Unicode string that is the user readable
name of the controller that is being managed by an
EFI Driver.
EFI Component Name
Protocol
GetDriverName
Retrieves a Unicode string that is the user readable
name of the EFI Driver.
EFI Device Path
Protocol
No associated function Can be used on any device handle to obtain generic
path/location information concerning the physical
device or logical device.
Start Starts a device controller or a bus controller.
Stop Stops a device controller or a bus controller.
EFI Driver Binding
Protocol
Supported
Tests to see if driver supports a given controller, and
further tests to see if driver supports creating a handle
for a specified child device.
ForceDefaults Forces a driver to set the default configuration options
for a controller.
OptionsValid Tests to see if a controller's current configuration
options are valid.
EFI Driver Configuration
Protocol
SetOptions
Allows the user to set controller specific options for a
controller that a driver is currently managing.
EFI Driver Diagnostics
Protocol
RunDiagnostics
Runs diagnostics on a controller.
EFI Driver Entry Point No associated function The main entry point for an EFI Driver.
DriverLoaded Used to associate a driver image handle with a device
path returned on a prior call.
GetDriver Retrieves the image handle of the platform override
driver for a controller in the system.
EFI Driver Override
Protocol
GetDriverPath Retrieves the device path of the platform override
driver for a controller in the system.
continued