Filter
Top Products
Extensible Firmware Interface Specification
12-68 12/01/02 Version 1.10
Value The comparison value used for the polling exit criteria.
Delay The number of 100 ns units to poll. Note that timer available may
be of poorer granularity.
Result Pointer to the last value read from the memory location.
Description
This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
performed at the PCI I/O address specified by BarIndex and Offset for the width specified by
Width. The result of this PCI I/O read operation is stored in Result. This PCI I/O read
operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
Mask) is equal to Value.
This function will always perform at least one I/O access no matter how small Delay may be. If
Delay is 0, then Result will be returned with a status of EFI_SUCCESS even if Result does
not match the exit criteria. If Delay expires, then EFI_TIMEOUT is returned.
If Width is not EfiPciIoWidthUint8, EfiPciIoWidthUint16,
EfiPciIoWidthUint32, or EfiPciIoWidthUint64, then EFI_INVALID_PARAMETER
is returned.
The I/O operations are carried out exactly as requested. The caller is responsible satisfying any
alignment and I/O width restrictions that the PCI controller on a platform might require. For
example on some platforms, width requests of EfiPciIoWidthUint64 do not work.
All the PCI transactions generated by this function are guaranteed to be completed before this
function returns.
Status Codes Returned
EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
EFI_INVALID_PARAMETER
Width is invalid.
EFI_INVALID_PARAMETER
Result is NULL.
EFI_UNSUPPORTED
BarIndex not valid for this PCI controller.
EFI_UNSUPPORTED
Offset is not valid for the PCI BAR specified by BarIndex.
EFI_TIMEOUT
Delay expired before a match occurred.
EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.