Filter
Top Products
Extensible Firmware Interface Specification
K-12 12/01/02 Version 1.10
Table K-1. Functions Listed in Alphabetic Order (continued)
Function Name Service or Protocol
Subservice Function Description
ReceiveFilters UNDI Commands This command is used to read and
change receive filters and, if
supported, read and change the
multicast MAC address filter list.
ReceiveFilters Simple Network
Protocol
Enables and disables the receive
filters for the network interface
and, if supported, manages the
filtered multicast HW MAC
address list.
RegisterCacheFlush EFI Byte Code
Protocol
Called to register a callback
function that the EBC interpreter
can call to flush the processor
instruction cache after creating
thunks.
RegisterExceptionCallback Debug Support
Protocol
Registers a callback function that
will be called each time the
specified processor exception
occurs.
RegisterPeriodicCallback Debug Support
Protocol
Registers a callback function that
will be invoked periodically and
asynchronously to the execution of
EFI.
RegisterProtocolNotify Boot Services Protocol Handler
Services
Registers for protocol interface
installation notifications.
ReinstallProtocolInterface Boot Services Protocol Handler
Services
Replaces a protocol interface.
Reset Block I/O Protocol Resets the block device hardware.
Reset Debugport Protocol Resets the debugport hardware.
Reset Serial I/O Protocol Resets the hardware device.
Reset Simple Input
Protocol
Resets a simple input device.
Reset Simple Network
Protocol
Resets the network adapter, and
reinitializes it with the parameters
that were provided in the previous
call to Initialize()
.
Reset Simple Pointer
Protocol
Resets the pointer device
hardware.
Reset Simple Text Output
Protocol
Resets the ConsoleOut device.
continued