Filter
Top Products
Alphabetic Function Lists
Version 1.10 12/01/02 K-27
Table K-2. Functions Listed Alphabetically within a Service or Protocol (continued)
Service or Protocol Function Function Description
BuildDevicePath Used to allocate and build a device path node for a
SCSI device on a SCSI channel.
GetNextDevice Used to retrieve the list of legal Target IDs for the
SCSI devices on a SCSI channel.
GetTargetLun Used to translate a device path node to a Target ID
and LUN.
PassThru Sends a SCSI Request Packet to a SCSI device that
is connected to the SCSI channel.
ResetChannel Resets the SCSI channel.
SCSI Passthru Protocol
ResetTarget Resets a SCSI device that is connected to the SCSI
channel.
GetControl Reads the status of the control bits on a serial device.
Read Receives a buffer of characters from a serial device.
Reset Resets the hardware device.
SetAttributes Sets communication parameters for a serial device.
SetControl Sets the control bits on a serial device.
Serial I/O Protocol
Write
Sends a buffer of characters to a serial device.
Simple File System
Protocol
OpenVolume
Opens the volume for file I/O access.
ReadKeyStroke Reads a keystroke from a simple input device. Simple Input Protocol
Reset
Resets a simple input device.
GetStatus Reads the current interrupt status and recycled
transmit buffer status from the network interface.
Initialize Resets the network adapter and allocates the transmit
and receive buffers required by the network interface;
also optionally allows space for additional transmit
and receive buffers to be allocated
MCastIPtoMAC Allows a multicast IP address to be mapped to a
multicast HW MAC address.
NVData Allows read and writes to the NVRAM device
attached to a network interface.
Receive Receives a packet from the network interface.
ReceiveFilters Enables and disables the receive filters for the
network interface and, if supported, manages the
filtered multicast HW MAC address list
Simple Network
Protocol
Reset
Resets the network adapter, and reinitializes it with
the parameters that were provided in the previous call
to Initialize()
.
continued