Filter
Top Products
Extensible Firmware Interface Specification
9-36 12/01/02 Version 1.10
Description
This function allows the configuration options to be set for the driver specified by This on the
controller specified by ControllerHandle and ChildHandle. This function must only use
the SIMPLE_INPUT_PROTOCOL
and SIMPLE_TEXT_OUPUT_PROTOCOL from the
EFI_SYSTEM_TABLE
to interact with the user, and it must use the language specified by
Language. If the driver specified by This does not support the language specified by
Language, then EFI_UNSUPPORTED is returned. If the controller specified by
ControllerHandle and ChildHandle is not supported by the driver specified by This,
then EFI_UNSUPPORTED is returned. If a device error occurs while setting the configuration
options, EFI_DEVICE_ERROR is returned. If there are not enough resources available to set the
configuration options, then EFI_OUT_OF_RESOURCES is returned.
The ActionRequired return value must always be set to a legal value by this function. The
caller must perform the required action regardless of the return status. The calling agent must also
perform the action described by ActionRequired prior to using any of the services produced by
ControllerHandle or any of its children.
Related Definitions
//*******************************************************
// EFI_DRIVER_CONFIGURATION_ACTION_REQUIRED
//*******************************************************
typedef enum {
EfiDriverConfigurationActionNone = 0,
EfiDriverConfigurationActionStopController = 1,
EfiDriverConfigurationActionRestartController = 2,
EfiDriverConfigurationActionRestartPlatform = 3,
EfiDriverConfigurationActionMaximum
} EFI_DRIVER_CONFIGURATION_ACTION_REQUIRED;
EfiDriverConfigurationActionNone
The controller specified by ControllerHandle is still in a usable state. No actions
are required before this controller can be used again.
EfiDriverConfigurationStopController
The driver has detected that the controller specified by ControllerHandle is not in a
usable state, and it needs to be stopped. The calling agent can use the
DisconnectController()
service to perform this operation, and it should be
performed as soon as possible.
EfiDriverConfigurationRestartController
This controller specified by ControllerHandle needs to be stopped and restarted
before it can be used again. The calling agent can use the
DisconnectController() and ConnectController()
services to perform
this operation. The restart operation can be delayed until all of the configuration options
have been set.