Filter
Top Products
Protocols — Network Support
Version 1.10 12/01/02 15-63
EFI_PXE_BASE_CODE.SetStationIp()
Summary
Updates the station IP address and/or subnet mask values of a network device.
Prototype
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_SET_STATION_IP) (
IN EFI_PXE_BASE_CODE *This,
IN EFI_IP_ADDRESS *NewStationIp, OPTIONAL
IN EFI_IP_ADDRESS *NewSubnetMask OPTIONAL
);
Parameters
This Pointer to the EFI_PXE_BASE_CODE instance.
NewStationIp Pointer to the new IP address to be used by the network device. If this
field is NULL, then the StationIp address will not be modified.
NewSubnetMask Pointer to the new subnet mask to be used by the network device. If this
field is NULL, then the SubnetMask will not be modified.
Description
This function updates the station IP address and/or subnet mask values of a network device.
The NewStationIp field is used to modify the network device’s current IP address. If
NewStationIP is NULL, then the current IP address will not be modified. Otherwise, this
function updates the StationIp field of the EFI_PXE_BASE_CODE_MODE
structure with
NewStationIp.
The NewSubnetMask field is used to modify the network device’s current subnet mask. If
NewSubnetMask is NULL, then the current subnet mask will not be modified. Otherwise, this
function updates the SubnetMask field of the EFI_PXE_BASE_CODE_MODE structure with
NewSubnetMask.
Status Codes Returned
EFI_SUCCESS The new station IP address and/or subnet mask were updated.
EFI_INVALID_PARAMETER One of the parameters is not valid.
EFI_NOT_STARTED The PXE Base Code Protocol is not in the started state.